Új jelszó kérése

Lakossági információ

Lakossági energiatermelő rendszerek

Céges/Közületi információ

Céges/Közületi energia termelő rendszerek

Referencia

Referencia

Hírlevél

Hírek

2013.09.02 16:04
2013.08.15 12:27
2013.08.08 14:31

Facebook

Termékajánló

Termék részletek



Fronius Symo 10.0-3-M LIGHT

Fronius Symo 10.0-3-M LIGHT
501 806 Ft+ÁFA (637 294 Ft)

Fronius trafó nélküli 3 fázisú, 2 Munkapontos inverter

 

Input:

Max. bemeneti áram: 27,0/ 16,5A

Max. bemeneti feszültség: 1000V

MPP feszültség tartomány: 270 - 800V

Output:

Max. kimeneti teljesítmény: 10000W

Max. kimeneti áram: 20A

Max. hatékonyság/hatásfok: 98%

Frekvencia: 50Hz/60Hz

 

A kommunikációs kártya (LAN/WLAN) nem része a terméknek, utólag bármikor beépíthető.

    • INPUT DATA

      Fronius Symo 10.0-3-M
      Max. input current 
      (Idc max1 / Idc max2)
      27.0 A / 16.5 A1)
      Max. usable input current total
      (Idc max1 + Idc max2)
      43.5 A
      Max.array short circuit current (MPP1 / MPP2) 40.5 A / 24.8 A
      Min. input voltage (Udc min) 200 V
      Feed-in start voltage (Udc start) 200 V
      Nominal input voltage (Udc,r) 600 V
      Max. input voltage
      (Udc max)
      1,000 V
      MPP voltage range
      (Umpp min - Umpp max)
      270 - 800 V
      Number of MPP trackers 2
      Number of DC connections 3 + 3
      Max. PV generator output (Pdc max) 15.0 kWpeak
      OUTPUT DATA
      AC nominal output (Pac,r) 10,000 W
      Max. output power 10,000 VA
      AC output current (Iac nom) 14.4 A
      Grid connection (voltage range) 3~NPE 400 V / 230 V or 3~NPE 380 V / 220 V (+20 % / -30 %)
      Frequency (frequency range) 50 Hz / 60 Hz (45 - 65 Hz)
      Frequency range (fmin - fmax) 45 - 65 Hz
      Total harmonic distortion 1.8 %
      Power factor (cos φac,r) 0 - 1 ind. / cap.
      GENERAL DATA
      Dimensions
      (height x width x depth)
      725 x 510 x 225 mm
      Weight 34.8 kg
      Degree of protection IP 66
      Protection class 1
      Overvoltage category (DC / AC)2) 1 + 2 / 3
      Night time consumption < 1 W
      Inverter design Transformerless
      Cooling Regulated air cooling
      Installation Indoor and outdoor installation
      Ambient temperature range -25°C to +60°C
      Permitted humidity 0 % to 100 %
      Max. altitude 2,000 m / 3,400 m (unrestricted / restricted voltage range)
      DC connection technology 6x DC+ and 6x DC- screw terminals 2.5 mm² - 16 mm²
      AC connection technology 5-pin AC screw terminals 2.5 mm² - 16 mm²
      Certificates and compliance with standards ÖVE / ÖNORM E 8001-4-712, DIN V VDE 0126-1-1/A1, VDE AR N 4105, IEC 62109-1/-2, IEC 62116, IEC 61727, AS 3100, AS 4777-2, AS 4777-3, CER 06-190, G83/2, UNE 206007-1, SI 4777, CEI 0-16, CEI 0-21, NRS 097
      EFFICIENCY
      Max. efficiency 98.0 %
      European efficiency (ηEU) 97.4 %
      η at 5 % Pac,r3)  87.9 / 92.5 / 89.2 % 
      η at 10 % Pac,r3) 91.2 / 94.9 / 92.8 %
      η at 20 % Pac,r3) 94.6 / 97.1 / 96.1 %
      η at 25 % Pac,r3) 95.4 / 97.3 / 96.6 %
      η at 30 % Pac,r3) 95.6 / 97.5 / 96.9 %
      η at 50 % Pac,r3) 96.3 / 97.9 / 97.4 %
      η at 75 % Pac,r3) 96.5 / 98.0 / 97.6 %
      η at 100 % Pac,r3) 96.5 / 98.0 / 97.6 %
      MPP adaption efficiency > 99.9 %
      PROTECTIVE DEVICES
      DC insulation measurement Yes
      Overload behaviour Operating point shift, power limitation
      DC disconnector Yes
      Reverse polarity protection Yes
      INTERFACES
      WLAN / Ethernet LAN Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON)
      6 inputs and 4 digital in/out Interface to ripple control receiver
      USB (type A socket)4) Datalogging, inverter update via USB flash drive
      2 x RS422 (RJ45 socket)4) Fronius Solar Net, Interface protocol
      Signalling output4) Energy management (floating relay output)
      Datalogger and Webserver Included
      External input 4) S0 meter connection / Evaluation of overvoltage protection
      RS485 Modbus RTU SunSpec or meter connection


      1) 14.0 A for voltages < 420 V
      2) Testing to IEC 62109-1. DIN rail for optional type 1 + 2 and type 2 overvoltage protection available. 
      3) And at Umpp min / Udc,r / Umpp max
      4) Available from autumn 2014.